Merit Filter Corporation Polyurethane Bucket Tip™

Merit Filter Corporation also manufactures, and sells, a polyurethane bucket tip to bolt to the front edge of the utility tractor’s bucket. The bucket tip should always be affixed to the utility tractor’s front edge before dried sludge is removed from the Merit Filter Bed Media™. This insures the media does not get damaged and does not get abraded from the hardened wear edge of the utility tractor’s bucket.

Bucket Tip Info

The bucket tip is molded of polyurethane with a Shore Durometer hardness reading of between 60 and 65 on the “D” scale, as measured using ASTM test method D 2240. The bucket tip shall have a steel insert molded within to provide rigidity. The bucket tip shall measure 6” wide by 1 ½” high by 60 inches long and have incorporated ten (10) countersunk holes to accept 3/8-16 flat head bolts and Nylok nuts. New fastening hardware for the bucket tip is stainless steel and is supplied with each bucket tip purchase. As this is a molded product it is available in the one configuration described above.